BACTERIOLOGICAL INCUBATOR
PEW-60

Construction

Cabinet: Double-walled cabinet with outer made of mild steel, and inner chamber made of either mild steel or stainless steel as required.

Insulation: Glass wool filled between the walls to a minimum thickness of 2 inches.

Outer door: Outer door is fitted on heavy chrome plated brass hinges, and it contains a 'spring and roller ' type latch.

Inner door: Inner door is made of glass and is provided with a magnetic latch.

Finish: Outer side and inner sides (in case of mild steel) are painted with enamel paint.

incubator.jpg

Heating and Control

Heating: Heating is carried out by a specially designed low-rating heater.

Control: The temperature is controlled by a thermostat. In PEW-60C, temperature is controlled by a solid-state temperature controller. For better accuracy and safety of the incubator, Digital Temperature Controller (PEW-202) can be provided at an extra cost.

Heat Transfer: Heat transfer occurs by natural air convection (except in PEW-60C) with proper inlet and outlet. In PEW-60C, heat is re-circulated with the help of a motorized blower.

Temp. Range: 5OC above the ambient temperature to 60OC maximum.

Accuracy: Better than ± 0.5OC.

pew.PNG