DIGITAL TEMP. CONTROLLER
PEW-202/PEW-205
Click to enlarge
DIGITAL TEMP. CONTROLLER
|
Click to enlarge |
| Specification | |||
| Max. Temp. | Accuracy | Sensor | Use With |
| 60OC | ± 0.5OC (Resolution 0.1OC). | RTD (PT100) | Incubators and Water Baths |
| 400OC | Better than ± 1OC. | RTD (PT100) | Ovens |
| 1200OC | ± 1% of maximum. | Cr/Al thermocouple | Furnaces |
| Ratings | 5A at 230 V AC (10A relay can be provided). |
| Features | Multi-turn potentiometer is provided to set the required temperature accurately. |
| Bright L.E.D. display to indicate the temperature. | |
| Press to set temperature switch. | |
| Front panel presets for calibration and relay on/off settings. | |
| Panel Mounting model of 96 x 96 Sq. mm. | |
| Open sensor protection. | |
SOLID STATE FUSE FOR FURNACES
|
 Click to enlarge |
| Solid state Fuse is very accurate and reliable as compared to Silver and Kanthal wire fuses. |
| Specification | |
| Working | When the temperature of the furnace exceeds the maximum temperature, the Solid state fuse turns the furnace off thereby preventing the heater elements from getting damaged. This action is indicated by the red lamp present on the panel. |
| Note: Supplied without thermocouple and compensating cable. |
| Back to Top | Products |